
Operation
16
Starting and Stopping
the Engine
Starting
1.
Set the parking brake: refer to Setting the
Parking Brake, page 15.
2.
Make sure spark plug wire(s) are
installed on
spark plug(s) and fuel valve is open.
3.
Move the choke control to “CHOKE” position
before starting a cold engine.
Note:
A warm or hot engine may require
choking. After engine starts, move
choke control to “RUN” position.
4.
Move the throttle control to the “FAST” position
before starting a cold engine.
5.
Turn the ignition key to “RUN” (Fig. 8).
6.
Grasp recoil starter handle firmly and pull out
until positive engagement results; then pull
handle vigorously to start engine and allow rope
to recoil slowly.
IMPORTANT: Do not pull recoil rope to its
limit or let go of the starter handle when rope
is pulled out because rope may break or recoil
assembly may be damaged.
7.
When engine starts move the choke control to
“RUN” position.
Stopping
1.
Move the throttle control to “SLOW” (Fig. 8).
Note:
If the engine has been working hard or
is hot, let it idle for a minute before
turning the ignition key “OFF.” This
helps cool the engine before it is
stopped. In an emergency, the engine
may be stopped by turning the ignition
key to “OFF.”
2.
Turn the ignition key to “OFF” (Fig. 8).
2
3
m–3065
1
Figure 8
1.
Choke lever
2.
Throttle lever
3.
Ignition key
3.
Pull wire off spark plug(s) to prevent possibility
of accidental starting before transporting or
storing machine.
4.
Close fuel shut off valve, under fuel tank, before
transporting or storing machine.
IMPORTANT: Make sure fuel shut off valve
is closed before transporting or storing
machine, as fuel leakage may occur.
5.
Set the parking brake: refer to Setting the
Parking Brake, page 15.
Содержание ProLine 30188
