Toro ProLine 139-7860, Руководство по установке

Страница: 3 / 12

g314783
Figure 3
1. Locknut (3/8 inch) 3. Bolt (3/8 x 3/4 inch)
2. Clamp
4. Install the latches to both sides of the back plate
using 4 phillips-head screws, 4 lock washers,
and 4 locknuts (#10);
Figure 4 .
Important:
Do not completely tighten the
nuts; the latches should be able to move up
and down.
g314784
Figure 4
1. Left latch 4. Right latch
2. Phillips-head screw 5. Locknut (#10)
3. Lock washer
3
Assembling the Bag and
Frame
Parts needed for this procedure:
1 Bag and pan
1 Catcher frame
2 Handle
4 Bolt (1/4 x 1 inch)
4 Locknut (1/4 inch)
4 Washer (1/4 inch)
Procedure
1. Slide the upper curved portion of the bagger
frame into the bag and the long straight rod
down toward the pan.
2. Snap the J-strips over the frame rods ( Figure 5 ).
g002158
Figure 5
1. Rod 2. J-strip
3. Arrange the bag around the frame.
4. Place the handles over the slots on each side
of the frame.
5. Push 2 bolts (1/4 x 1 inch) through each handle
and the fabric from the outside, and secure them
with 4 washers (1/4 inch), and locknuts (1/4
inch) as shown in
Figure 6 .
3