Toro Pro Force 44549, Руководство оператора

Страница: 12 / 20

Maintenance
Maintenance Safety
•
Before cleaning, servicing, or adjusting the
machine, do the following:
– Park the machine on a level surface.
– Wait for all moving parts to stop.
– Remove the machine from the traction unit.
– Lower the jack stand.
– Allow machine components to cool before
performing maintenance.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or you need assistance, contact an
authorized Toro distributor.
•
Support the machine with blocks or jack stands
when working beneath it.
•
Ensure that all guards are installed securely after
maintaining or adjusting the machine.
•
Do not allow untrained personnel to service the
machine.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all damaged or
missing decals.
•
Do not interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
If major repairs are ever necessary or assistance
is required, contact an authorized Toro distributor.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro®
Company.
Lubricating the Blower
Service Interval: Every 50 hours
The debris blower has bearings and bushings
that must be lubricated regularly. If the machine
is operated under normal conditions, lubricate
bearings with No. 2 lithium grease. Lubricate fittings
immediately after every washing, regardless of the
interval listed.
The lubrication points are as follows:
Drive pulley ( Figure 11 )
g021632
Figure 11
Shown with cover removed
Castor wheel shaft (2) ( Figure 12 )
g011557
Figure 12
12