Toro GreensPro 1260, Руководство оператора

Страница: 8 / 36

1
Installing the Transport
Wheels
Parts needed for this procedure:
2 Transport wheel
Procedure
1. Remove the lug nuts securing the wheel hubs to
the shipping brackets (
Figure 3 ). Also, remove
the nuts threaded onto the stud of each wheel
hub.
g024006
Figure 3
1. Lug nut 2. Shipping bracket
2. Carefully remove the shipping brackets from the
crates.
3. Install the transport wheels onto the wheel hubs
with the lug nuts. Hand-tighten the lug nuts.
Note:
The lug nuts will be torqued at the
completion of step 2.
4. Adjust the tire pressure to 103 kPa (15 psi).
2
Installing the Hitch
Assembly
Parts needed for this procedure:
1 Lock bracket
4 Bolt (M10 x 30 mm)
4 Lock washer (M10)
6 Washer (M10)
4
Nut (M10)
1 Hitch assembly
1 Bolt (M10 x 100 mm)
1 Locknut (M10)
1 Bolt (M12 x 100 mm)
2 Washer (M12)
1 Locknut (M12)
2 Spacer washer (when applicable)
Procedure
1. Install the lock bracket to the frame of the
machine as shown in
Figure 4 .
Note:
Torque the nuts to 52 N∙m (38 ft-lb).
g036890
Figure 4
1. Bolt—M10 x 30 mm (4) 4. Nut—M10 (4)
2. Lock washer—M10 (4) 5. Lock bracket
3. Washer—M10 (4)
2. Secure the hitch to the hitch pivot bracket with
the appropriate hardware; refer to
Figure 5 .
8