Toro Greensmaster Flex 21, Руководство по обслуживанию

Страница: 147 / 150

Greensmaster Flex 21 Groomer (Model 04204) (Rev. B) Page 9 – 15
Groomer Arm Assembly
Figure 17
1. HOC groomer arm (LH shown)
2. Flange nut
3. Grooved pin
4. E–ring
5. Groomer lift rod
6. Lock screw
7. Bushing
8. Lift arm assembly (LH shown)
9. Detent spring
10. Spring washer
11. Cap screw
12. Bushing
13. Wave washer
14. Groomer adjuster
13
3
5
14
2
6
4
7
12
9
10
8
11
7
1
Antisieze
Lubricant
Antisieze
Lubricant
Antisieze
Lubricant
Disassembly
1. Remove groomer arm from cutting unit (see Groom-
er Reel Removal in this section).
2. Disassemble groomer arm using Figure 17 as a
guide.
NOTE: Right and left side HOC groomer arms and lift
arm assemblies are different; other components shown
in Figure 17 are the same on both sides of machine.
NOTE: Grooved pin (item 3) is used to retain lock screw
(item 6) to lift arm assembly.
Assembly
1. Apply antisieze lubricant to threads of groomer lift
rod (item 5) and lift arm assembly (item 8). Assemble
groomer arm using Figure 17 as a guide.
2. Install groomer arm onto cutting unit (see Groomer
Reel Installation in this section).
3. Check height–of–cut and adjust as needed.
Groomer Reel (Model 04204)