Toro Flex-Force Power System 51834, Руководство оператора

Страница: 17 / 68

Adjusting the Cutting Swath
The trimmer comes from the factory with a cutting swath of 28 cm (11 inches) as shown in A of Figure 13 . Refer
to the following instructions to adjust the swath to 33 cm (13 inches) as shown in D of Figure 13 .
1. Remove the swath blade from the guard by removing the 2 screws and 2 lock washers holding it in place
(B of
Figure 13 ) and rotate the swath blade 180°.
2. Once the swath blade is rotated, install it onto the guard using the 2 screws and 2 lock washers previously
removed (C of
Figure 13 ).
g333605
Figure 13
Operating Tips
•
Keep the trimmer tilted toward the area being cut;
this is the best cutting area.
•
The string trimmer cuts when you move it from left
to right. This prevents the trimmer from throwing
debris at you.
•
Use the tip of the string to do the cutting; do not
force the string head into uncut grass.
•
Wire and picket fences can cause the string to
wear rapidly and even break. Stone and brick
walls, curbs, and wood can also cause the string
to wear rapidly.
•
Avoid trees and shrubs. The string can easily
damage tree bark, wood moldings, siding, and
fence posts.
g333402
Figure 14
1. Direction of rotation 2. String path
15