Toro CM-1258Y-SD, Руководство оператора

Страница: 16 / 40

g021107
Figure 14
Hitching a Machine with a Stamped
Ball Coupler
1. Apply chassis grease to the socket of the coupler
and the area of the clamp that contacts the ball.
2. Oil the pivot points and sliding surfaces of the
coupler with SAE 30 motor oil.
3. Open the coupler latch ( Figure 15 ).
g020359
Figure 15
1. Bail
2. Safety pin
4. Position the coupler on top of the hitch ball
(
Figure 15 A).
5. Close the coupler latch ( Figure 15 B).
6. Open the bail on the safety pin and insert the pin
through the hole in the latch (
Figure 15 B).
7. Rotate the free end of the bail over the end of
the safety pin that is protruding through the latch
(
Figure 15 C).
8. If the machine is equipped with a trailer-light kit,
connect the wire plug of the tow vehicle to the
wire plug of the machine.
16