Toro CM-1258Y-SD, Руководство оператора

Страница: 10 / 40

2
Installing the Safety Chain
Parts needed for this procedure:
1 Safety chain
2 Connecting link
Installing the Safety Chain
1. Form a hook on the end of a bendable piece
of rod or stiff wire (not included), and insert it
through both keyholes in the front post of the
machine (
Figure 4 A).
g019883
Figure 4
1. Keyhole 3. Safety chain
2. Rod or wire (not included) 4. Connecting link
2. Attach the safety chain to the length of rod or
wire (
Figure 4 A).
3. Pull the rod, or wire, and the safety chain
through both keyholes (
Figure 4 B).
Note:
Ensure that approximately equal lengths
of safety chain extend from either side of the
front post.
Installing the Connecting Links
1. Align the connecting link to the last link in one
end of the safety chain (
Figure 4 D).
2. Insert the connecting link through the chain link
until the connecting link snaps closed.
3. Repeat steps 1 and 2 to install the other
connecting link in the other end of the safety
chain.
10