7
Assembly
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
DESCRIPTION
QTY.
USE
Knob
Curved washer
Handle lock
1
1
1
Installing the handle (Models 38517 and 38518
only)
Screws
Locknuts
Washers
Discharge chute
Chute handle (Models 38515 and 38516 only)
3
3
3
1
1
Installing the discharge chute
Bolts
Locknuts
Chute crank and mounting bracket
2
2
1
Installing the chute crank (Models 38517 and
38518 only)
Ignition key
1
Starting and stopping the engine
Power cord (electric-start models only)
1
Starting the engine
Unfolding the Handle
Models 38515 and 38516
1. Cut the plastic tie that secures the control cable to the
handle (Fig. 2).
1
2
3
m5536
Figure 2
1.
Handle
2.
Plastic tie
3.
Control cable
Important
If you do not cut the plastic tie, the rotor
brake will not function properly.
2. Loosen the knobs and pull out the handle locks until the
upper handle rotates freely (Fig. 3).
m4523a
1
2
3
Figure 3
1.
Knob (2)
2.
Upper handle
3.
Handle lock (2)
3. Position the upper handle as shown in Figure 4.
