SET ZONE TIMES Setup
The SET ZONE TIMES setup tells the controller how much time each station will be
activated (runtime).
Step 1 – Place the function dial to the SET ZONE TIMES
position.
Step 2 – Press
PRG
to select the program being modified. Select from
A
,
B
or
C
.
Step 3 – Press
or
to select the Zone (station) number (1–6) being modified.
Step 4 – Press
or
to adjust the desired time duration (runtime) you want the station to
be active. Each station can have a runtime of one minute and up to six hours. For
unused stations, adjust the runtime to
0:00
.
Step 5 – Repeat steps 2–4 for the remaining stations and programs.
Step 6 – Return the function dial to
RUN
when finished.
Minutes
Hours
Downloaded from
www.Manualslib.com
manuals search engine
