background image

23

Figure 21

Maintenance

Air Filter

Air 

Filter 

Cover

Knob

Checking the Fuel Cap

WARNING:

A leaking fuel cap is a fire hazard and must be 
replaced immediately.

The fuel cap contains a non-serviceable filter and check 
valve. A clogged fuel filter causes poor engine performance. 
If performance improves when the fuel cap is loosened, 
the check valve may be faulty or the filter may be clogged. 
Replace the fuel cap if necessary.

Cleaning the Air Filter

See Figures 21 and 23.
Clean the air filter as indicated by the maintenance schedule.
To clean the air filter:

  1. 

Stop the trimmer.

WARNING:

Make sure the trimmer head stops rotating when 
you release the trigger. Contact with a rotating 
trimmer head could cause personal injury.

  2. 

Remove the spark plug boot.

  3. 

Loosen the air filter cover by turning the knob counter-
clockwise.

  4. 

Remove the air filter cover.

  5. 

Remove the air filter.

  6. 

Clean the air filter with warm soapy water.

  7. 

Rinse the air filter and let it dry completely.

  8. 

Work two drops of oil into the air filter.

  9. 

Replace the air filter (fits only one way).

10. 

Replace the air filter cover.

11. 

Tighten the air filter cover by turning the knob clockwise.

12. 

Replace the spark plug boot.

 

Note:

 Replace the air filter (Part No. 88048) as 

indicated by the maintenance schedule.

Cleaning the Spark Arrester

See Figure 22.
The spark arrester may need to be replaced after repeated 
use. If replacement is necessary, use Toro part number 
6300210.

To clean the spark arrester:
  1.

  Locate the spark arrester through the hole on the 

muffler-side engine cover.

  2.

  Remove the spark arrester by pulling it out with needle-

nosed pliers.

  3.

  Clean the spark arrester with a small wire brush.

  4.

  Replace the spark arrester.

Maintenance

Spark

Arrester

Содержание 51952































Отзывы: