Toro 51952, Руководство оператора

Страница: 20 / 30

20
Operating the Brushcutter
(Model No. 51993)
See Figure 17.
To operate the brushcutter:
1.
Start the brushcutter.
2.
Hold the brushcutter at waist level with your right hand
(arm extended) on the trigger handle and your left hand
on the front handle.
3.
Place the product on the right side of your body with the
engine behind and away from your body.
4.
Brushcut weeds and vines in a right-to-left motion with
the blade parallel to the ground.
Figure 17
Operation
Cutting Tips
See Figure 18.
1.
Avoid hot surfaces by always keeping the tool away
from your body. (Proper operating position is shown in
Figures 16a and 17.)
2.
Keep the trimmer tilted toward the area being cut; this is
the best cutting area.
3.
The straight shaft trimmer cuts when passing the unit
from left to right. This will avoid throwing debris at the
operator. Avoid cutting in the dangerous area shown in
figure 18.
4.
Use the tip of string to do the cutting; do not force string
head into uncut grass.
5.
Wire and picket fences cause extra string wear, even
breakage. Stone and brick walls, curbs, and wood may
wear string rapidly.
6.
Avoid trees and shrubs. Tree bark, wood moldings, sid-
ing, and fence posts can easily be damaged by the string.
Figure 18
Straight Shaft Trimmer
Dangerous
Cutting Area
Direction of
Rotation
Best Cutting
Area
PROPER OPERATING
POSITION
Operation