Toro 51845T, Руководство оператора

Страница: 12 / 280

Starting the Chain Saw
1. Ensure that the vents on the chain saw are free
from dust and debris (
Figure 6 ).
g315701
Figure 6
1. Side vent 2. Bottom vent
2. Set the chain saw down on a level surface.
3. Align the tongue of the battery pack with the
battery cavity in the chain saw (
Figure 7 ).
g315702
Figure 7
4. Push the battery pack into the battery cavity until
the battery pack locks into place.
5. Remove the protective cover from the chain.
6. Ensure that the chain brake is in the O
PERATING
position ( Figure 8 ).
g315703
Figure 8
1. Chain brake (O
PERATING
position)
2. Chain brake (
STOP
position)
7. With your left hand on the front handle and your
right hand on the rear handle, press the trigger
lock, then squeeze the trigger (
Figure 9 ).
g315704
Figure 9
1. Front handle 4. Trigger
2. Chain brake 5. Rear handle
3. Trigger lock
Shutting Off the Chain Saw
To shut off the chain saw, release the trigger.
Whenever you are not using the saw or are
transporting the saw to or from the work area, move
the chain brake to the S
TOP
position ( Figure 8 ) and
remove the battery pack.
10