Setup
1. Assembling the Blower
Install the blower tube and then the inlet cover onto the blower
housing.
Important:
You must install the blower tube before
installing the inlet cover because the inlet cover hooks onto
the blower tube. The blower will not run unless the bottom
inlet cover is locked in place.
2. Converting from Blower to
Vacuum
The impeller rotates for a few seconds after you turn off
the blower and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor is
running or when the unit is plugged into a power outlet.
1.
Remove the inlet cover and the blower tube from the blower
housing.
Figure 3
2.
Install the vacuum tube onto the blower housing.
Important:
The vacuum will not run unless the
vacuum tube is locked in place.
3
