Toro 51595, Руководство оператора

Страница: 12 / 16

12
m–4169
1
2
Figure 15
1. Battery cover 2. Screw
2. Pull the battery out of the trimmer (Fig. 16).
3. Disconnect the the wire leads from the battery
(Fig. 16).
m–4170
1
3
2
5
4
Figure 16
1. Battery (some models
may have a slightly
different configuration)
2. Negative connector
3. Negative terminal
4. Positive connector
5. Positive terminal
4. Place hedge trimmer upside down on workbench and
remove the blade cover screws and the blade cover
(Fig. 17).
Note: Be very careful throughout this procedure not to
lose the screws or the screw inserts on the inside of the
trimmer.
m–4101
1
2
Figure 17
1. Blade cover 2. Blade cover screws
5. Align the cams that are fitted in the blade loops by
moving the blades slightly (Fig. 18).
m–4103
1
2
3
Figure 18
1. Blade loops
2. Misaligned cams
3. Aligned cams
6. Remove blade screws (Fig. 19).
m–4102
1
1
Figure 19
1. Blade screws
7. Pull the blade up and off of the cams, removing the
blade from the trimmer.
8. Ensure that the cams are still aligned (Fig. 18).