Toro 51480A, Руководство оператора

Страница: 5 / 12

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Auxiliary handle 1
Latch 1
1
Brace 1
Install the auxiliary handle.
Guard 1
2
Phillips screw 1
Install the guard.
3
Edge guard 1 Install the edge guard.
4
No parts required
–
Adjust the trimmer height and the base
position.
1
Installing the Auxiliary
Handle
Parts needed for this procedure:
1 Auxiliary handle
1 Latch
1 Brace
1. Position the auxiliary handle on the shaft of the trimmer with
the smooth surface facing you (
Figure 1 ).
g017277
Figure 1
1. Auxiliary handle 3. Brace
2. Latch
2. Slide the brace into the auxiliary handle so that the brace
rests in the groove along the shaft (
Figure 1 ).
3. Slide the latch from the left through the handle and brace,
and tighten the latch screw with a Phillips screwdriver
(
Figure 1 ).
5