background image

Warranty Statement

One-Year Limited Warranty

Conditions and Products Covered

Your Bullseye product (“Product”) is warranted to be free from defects in
materials or workmanship for 1 year. Where a warrantable condition exists,
we will repair the Product at no cost to you including diagnostics, labor,
parts, and transportation. This warranty begins on the date the Product is
delivered to the original retail purchaser.

Instructions for Obtaining Warranty Service

You are responsible for notifying the distributor or authorized dealer from
whom you purchased the Product as soon as you believe a warrantable
condition exists. If you need help locating a distributor or authorized dealer,
or if you have questions regarding your warranty rights or responsibilities,
you may contact us at:

Bullseye Commercial Products Service Department
8111 Lyndale Avenue South
Bloomington, MN 55420-1196

952-888-8801 or 800-952-2740

Items and Conditions Not Covered

Not all product failures or malfunctions that occur during the warranty
period are defects in materials or workmanship. This warranty does not
cover the following:

Product failures which result from the use of non-Bullseye replacement
parts, or from installation and use of non-Bullseye branded accessories
and products, or unapproved modifications to the Product, accessory,
or replacement part.

Product failures which result from failure to perform recommended
maintenance and/or adjustments.

Product failures which result from misusing the Product or using it in
an abusive, negligent, or reckless manner.

Parts consumed through use that are not defective. Examples of parts
which are consumed, or used up, during normal Product operation
include, but are not limited to, blades, reels, rollers and bearings
(sealed or greasable), bed knives, spark plugs, castor wheels and
bearings, tires, filters, belts, and discs, seed element castings, rotors,
brushes, scrapers, fraze blades, rake tines, PTO’s, and draw bars.

Failures caused by outside influence, including, but not limited to,
weather, natural disaster, storage practices, contamination, use of
unapproved fuels, coolants, lubricants, additives, fertilizers, water, or
chemicals.

Failure or performance issues due to the use of fuels (e.g. gasoline,
diesel, or biodiesel) that do not conform to their respective industry
standards.

Normal noise, vibration, wear and tear, and deterioration. Normal
“wear and tear” includes, but is not limited to, damage to seats due to
wear or abrasion, worn painted surfaces, scratched decals or windows.

Parts

Parts scheduled for replacement, as required maintenance, are covered for
the same warranty period as the product warranty. Parts replaced under
this warranty are covered for the duration of the original product warranty.
Bullseye may retain all parts being replaced. Bullseye will make the final
decision whether to repair any existing part or assembly or replace it.
Bullseye may use remanufactured parts for warranty repairs.

Maintenance is at Owner’s Expense

Engine tune-up, lubrication, cleaning and polishing, replacement of filters,
coolant, and completing recommended maintenance are some of the
normal services Bullseye products require that are at the owner’s expense.

General Conditions

Repair by an Authorized Distributor or Dealer is your sole remedy under
this warranty.

Neither Bullseye, nor any company involved in the manufacture,
distribution, or sale of a Bullseye product shall be liable for indirect,
incidental or consequential damages arising out of or related to
the sale or use of the Product, including any cost or expense of
providing substitute equipment or service during reasonable periods
of malfunction or non-use pending completion of repairs under this
warranty. Except for the emissions warranty referenced below, if
applicable, there is no other express or implied warranty.

Some states do not allow exclusions of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above
exclusions and limitations may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from
state to state.

Note Regarding Emissions Warranty

The emissions control system on your Product may be covered by a
separate warranty from the engine manufacturer, meeting requirements
established by the U.S. Environmental Protection Agency (EPA) and/or
the California Air Resources Board (CARB). The hour limitations set forth
above do not apply to the emissions control system warranty. Refer to the
engine emission control warranty statement supplied with your product or
contained in the engine manufacturer’s documentation.

374-0333 Rev A

 

Содержание 46405AA

















Отзывы: