6
•
Performing maintenance on machine not properly
supported with jack stands may cause machine to fall
and could cause injury.
•
Do not over speed the engine by changing the governor
settings. Maximum engine rpm with no load is 3000
rpm. To ensure safety and accuracy, have an Authorized
TORO Distributor check maximum engine speed with a
tachometer.
•
Engine must be shut off before checking oil or adding
oil to the crankcase.
•
If wheel is removed for maintenance or repairs on the
wheel, brake, or hydraulic wheel motor, when
remounting wheel ALWAYS
ensure that the wheel
motor axle nut is torqued to 200–400
ft.–lb.
•
To be sure of optimum performance and safety, always
purchase genuine TORO replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
machine in any manner may affect the machine’s
operation, performance, or durability, or its use may
result in injury or death. Such use could void product
warranty of The Toro Company.
•
NEVER attempt to service the gas springs located on
hopper and hopper door. These springs are under high
loads and improper handling ran result in bodily harm.
Special tools are required to replace worn or damaged
gas springs; contact an Authorized TORO Distributor.
Содержание 44044
Страница 31: ...31 Hydraulic Schematic...
Страница 32: ...32 Electrical Schematic...