Toro 41165, Руководство оператора

Страница: 36 / 52

36
Figure 40
Five on each side
Figure 41
Figure 42
Figure 43
Replacing the Fuel Filter
Replace the fuel filter after every 100 operating hours.
1. Set the parking brake, stop the pump, stop the engine,
and remove the ignition key.
2.
Release the latch on the back of the seat and lift the seat
forward.
3. Clamp off the hose on either side of the fuel filter to
prevent gas from pouring out of the hoses when you
remove the filter.
4. Place a drain pan under the filter.
5.
Squeeze the ends of the hose clamps together and slide
them away from the filter (Fig. 44).
6. Remove the filter from the fuel lines.
m–3365
1
2
3 4
Figure 44
1. Hose clamp
2. Fuel line 3. Filter
4. Flow direction arrow
7.
Install a new filter and move the hose clamps close to
the filter.
Ensure that the flow direction arrow points toward the
engine.