Toro 39519, Руководство оператора

Страница: 48 / 60

Changing the Transmission Filters
Service Interval: After the first 100 hours
Every 250 hours thereafter
Note:
Do not change the hydraulic system oil (except
for what can be drained when changing filter), unless
the oil has been contaminated or been extremely hot.
1. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
2. Raise the machine and support it with jack
stands with a 460 kg (1,015 lb) capacity.
3. Remove the 3 washer-head bolts (1/4 x 3/4 inch)
that secure the filter guard to the transmission,
and remove the guard (
Figure 57 ).
g026014
Figure 57
1. Transmission 4. Washer-head bolts (1/4 x
3/4 inch)
2. Filter adapter 5. Filter guard
3. Transmission filter
4. Clean the around the transmission filter ( Figure
57 ).
5. Align a drain pan under the filter.
6. Rotate the filter counterclockwise and remove
the filter (
Figure 57 ).
Note:
Allow the oil to completely drain from the
filter adapter of the transmission.
7. Apply a thin coat of specified oil onto the seal of
the new transmission filter.
8. Install the filter by rotating it clockwise onto the
filter adapter until the seal contacts the base of
the adapter, then tighten the filter an additional
3/4 to 1 turn (
Figure 57 ).
9. Install the filter guard with the 3 washer-head
bolts (1/4 x 3/4 inch) that you removed in step
3
( Figure 57 ), and tighten the bolts to 1117 to 1243
N-cm (90 to 110 lb-in).
48