Toro 316000001, Руководство по установке

Страница: 6 / 12

Figure 10
1. Flange locknut (5/16 inch) 3. Drain-valve bracket
2. Fender strap 4. Carriage bolt (5/16 x 1-1/4
inches)
3. Assemble the valve bracket, fender strap, mud flap, and
fender (
Figure 10 ) with the 2 carriage bolts (5/16 x
1-1/4 inches) and 2 flange locknuts (5/16 inch).
4. Torque the carriage bolts and flange locknuts to 1978
to 2542 N∙m (175 to 225 in-lb).
7
Moving the Drain Valve
Parts needed for this procedure:
2 Flange nut (5/16 inch)
2 Flange-head bolts (5/16 x 1 inch)
Procedure
1. Remove the lynch pin that secures the drain valve to
the sprayer-pump bracket (
Figure 11 ).
Figure 11
1. Lynch pin 3. Drain valve
2. Sprayer-pump bracket
2. Move the drain valve between the left, rear fender and
the sprayer pump (
Figure 11 ).
6