Toro 316000001, Руководство по установке

Страница: 3 / 12

2. Align the holes on the reinforcement plate with the
holes on the rubber cover (
Figure 3 ).
Figure 3
1. Reinforcement plate
2. Rubber cover
3. Install 11 pop rivets (3/16 x 1/2 inch) and washers
(3/16 inch) to the center-boom cover (
Figure 4 ).
Figure 4
1. Pop rivet (3/16 x 1/2 inch) 3. Washer (3/16 inch)
2. Center-boom cover
3
Attaching an 11-Nozzle Boom
Cover to a 12-Nozzle Boom
Cover
Parts needed for this procedure:
1 12-nozzle, center-boom cover
22 Pop rivet (3/16 x 1/2 inch)
22 Washer (3/16 inch)
1 Rubber cover
1 Reinforcement plate
Procedure
1. Align the holes on the 11-nozzle boom cover with
the holes on the reinforcement plate attached to the
12-nozzle boom cover (
Figure 5 ).
Note:
The reinforcement plate comes attached to the
12-nozzle boom with pop rivets.
Figure 5
1. 11-nozzle cover 3. 12-nozzle cover
2. Reinforcement plate
3