5
Installing the Fuse
4WD Switch Only
Parts needed for this procedure:
1
Fuse (10 A)
1
Fuse decal
Procedure
Important:
This procedure is necessary if you
are going to install the 4WD switch.
1.
Install the fuse into the C4 slot in the fuse box
(
).
Note:
If another fuse is already occupying the
C4 slot, place the fuse in any open auxiliary slot.
g205019
Figure 17
1.
C4 Slot
3.
Auxiliary slot
2.
Fuse
Important:
Note which fuse slot
corresponds to which auxiliary power wire.
If the switch is connected to a wire without a
fuse, it will not function.
2.
Place the fuse decal in the corresponding panel
of the fuse map decal located under the toolbox
cover.
g206710
Figure 18
Fuse decal in C4 slot, previous model machines
1.
C5 Auxiliary slot
2.
C4 Auxiliary slot with decal
g312777
Figure 19
Fuse decal in C3 slot, new model machines
1.
C3 Auxiliary slot
13
