![Toro 31102 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/toro/31102/31102_installation-instructions-manual_1130809010.webp)
Connecting the Long Hose
(4WD Models)
For a simpler method of connecting the long hose on
2WD models, refer to
Models Only) (page 11)
.
1.
Disconnect the hose from the hydraulic line on the left
side of the machine and from the tee fitting on the top
of the pump (
). Discard the hose.
Note:
Have a drain pan or a rag available to catch the
hydraulic fluid.
2
G025597
1
g025597
Figure 15
As viewed from under the machine
1.
Hydraulic line
2.
New hose
2.
Install a tee fitting to the hydraulic line (
).
3.
Connect the 90 degree fitting end of the new short
hose to the hydraulic line tee fitting and the straight
fitting end to the tee fitting on the pump (
and tighten both ends of the hose.
4
2
G025295
3
1
g025295
Figure 16
As viewed from under the machine
1.
Hydraulic line
3.
Short hose
2.
Tee fitting
4.
Long hose
4.
Install the end of the long hydraulic hose to the inboard
port of the right wing cylinder and tighten the fitting.
5.
Route the hose from the right wing cylinder along the
mid-length hose, under the hydraulic tank bracket and
to the new tee fitting (
) and tighten the fitting.
Note:
Make sure that the hose is not twisted and does
not contact any hot, sharp, or moving parts.
10
Содержание 31102
Страница 15: ...Notes...
Страница 16: ......