Toro 30743, Руководство оператора

Страница: 11 / 16

11
Operating
Instructions
Note: Determine the left and right sides of the machine
from the normal operating position.
Thrown debris has considerable force and could
cause injury.
• Stay away from the sweeping area when the
machine is operating.
• Keep bystanders away from the sweeping area
when the machine is running.
Warning
Operation
1. Lower the broom to the ground and place lever in float
position.
2. Increase engine speed to full throttle position.
3. Engage PTO lever.
4. Drive traction unit at a slow, comfortable speed.
Broom Angle
Manual Swivel
To set the broom angle straight, left or right, remove the pin
from the manual swivel, swivel the broom head to the
desired position and replace the pin.
Electric Swivel Option (Model 30728)
Toggle the control box broom angle switch left or right
until the desired position is reached and release the switch.
Operating Tips
You can add measurable sweeping hours to your brush by
remembering these simple things:
1. More pressure does not give a better sweep.
2.
A level brush lasts longer.
3. Faster ground speed will cause the brush to wear faster.
Ground Speed
Bulldozing produces a side thrust and excessive stress on
the broom. While operating under the plow effect, the
bristles are flexed against the steel ring which holds them
and, eventually, this flexing will break the bristles from the
ring.
Curb Climbing and Trailer
Loading
When climbing curbs or loading the broom on a trailer,
raise the broom to the transport position and drive forward
slowly. The curb or trailer ramp will contact the brush
bristles and raise the broom for proper climbing.