Maintenance Service
Interval
Maintenance Procedure
Every 400 hours
• Check the fuel lines and connections.
• Check the engine speed (idle and full throttle).
Every 500 hours
• Check the engine overheat warning system.
• Replace the primary air filter (more frequently in extreme dusty or dirty conditions).
• Replace the fuel-filter canister.
• Check the electrical system.
• Change the transmission-oil filter.
• Change the hydraulic-return filter.
• Check the rear-wheel alignment.
• Service the hydraulic system.
• Check the hydraulic-fluid-overheat warning system.
Every 800 hours
• Drain and clean the fuel tank.
• Adjust the engine valves (refer to the engine operator’s manual).
Before storage
• Drain and clean the fuel tank.
Yearly
• Replace the blades.
Every 2 years
• Flush and replace the cooling system fluid.
• Replace all moving hoses.
• Replace the transmission cable (contact your Authorized Toro Distributor).
Daily Maintenance Checklist
Duplicate this page for routine use.
For the week of:
Maintenance Check Item
Mon.
Tues.
Wed.
Thurs.
Fri.
Sat.
Sun.
Check the safety interlock operation.
Check the brake operation.
Check the engine oil and fuel level.
Check the air filter restriction indicator.
Check the radiator and screen for debris.
Check unusual engine noises.
1
Check unusual operating noises.
Check the hydraulic system oil level.
Check hydraulic hoses for damage.
Check for fluid leaks.
Check the tyre pressure.
Check the instrument operation.
Check the rotor and blades.
Check the height-of-cut adjustment.
Check all grease fittings for lubrication.
2
Touch-up damaged paint.
1. Check the glow plug and injector nozzles if hard starting, excess smoke, or rough running is noted.
2. Immediately after every washing, regardless of the interval listed
35
