8.
The mower is now in a freewheel condition and can be
towed for a short distance at slow speed.
Note:
Remove the wheel chocks before towing.
9.
After towing the mower:
To return the mower to its
normal working condition the following procedure
must be done:
A.
Chock the front wheels.
B.
Close the bypass valve on the transmission pump
by turning it clockwise.
10.
Commission the front-wheel-motor disc-brakes
as follows:
Note:
Ensure that the M12 x 40 mm setscrews
and washers are removed and stored underneath the
operator platform.
A.
Identify the right front-wheel-motor disc-brake
assembly.
B.
Rotate the setscrew counterclockwise and remove
together with the washer.
C.
Assemble the hex plug into the motor-end plate
(
).
1
2 3 4
g014451
Figure 46
1.
Front-wheel motor
3.
Washer M12
2.
Hex plug
4.
Setscrew M12 x 40 mm
D.
Identify the left front-wheel-motor disc-brake
assembly and repeat the previous procedure.
E.
Remove the wheel chocks.
F.
Disconnect the tow bar.
Note:
The mower braking system now operates
in the normal way.
32
