Toro 30487TC, Руководство оператора

Страница: 10 / 60

decal120-9195
120-9195
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator’s Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1. Warning—read the Operator’s Manual ; do not operate the
machine unless you are trained.
8. Warning—wear hearing protection.
2. Cutting/dismemberment hazard, mower blade—keep
bystanders away; do not carry passengers on the machine.
9. Disengage
3. Sliding/loss of control hazard; tipping hazard, drop-offs—do
not mow near drop-offs; keep away from drop-offs; do not turn
at high speeds; turn at low speeds. 10. Engage
4. Tipping hazard—wear the seatbelt when a roll bar is in place;
do not wear the seatbelt when the roll bar is lowered. 11. Parking brake
5. Thrown object hazard—keep bystanders away; lower the
deflector before using the machine.
12. Start the engine—Clean grass and debris from the mower
belt and pulleys, disengage the PTO, set the drive in neutral,
engage the parking brake, turn the key to power on the
mower, and turn the key fully to start the engine.
6. Warning—engage the parking brake, shut off the engine, and
remove the key before leaving the machine. 13. Read the Operator’s Manual .
7. Cutting/dismemberment hazard of hands or feet, mower
blade—remove the key and read the
Operator’s Manual
before performing maintenance; stay away from moving parts;
keep all guards and shields in place.
decal120-9196
120-9196
1. Forward 3. Slow 5. Reverse 7. Read the Operator's
Manual for more
information on the hydraulic
fluid.
2. Fast 4. Neutral 6. Tow valve location; torque
the tow valves to 5.65 to
7.91 N∙m (50 to 70 in-lb).
10