Toro 30484, Руководство оператора

Страница: 22 / 60

Using the Mid-Size Weight
Weights are installed on certain mowers to improve
balance and improve performance. The weights can be
moved or removed to create optimized performance
under different mowing conditions and for operator
preference (Figure 22 or Figure 23).
The following table indicates the position of the weight
as installed at the factory.
Mower Deck Size Number of weights
install
Position of the
weight
36 inches 1 Front
40 inches 1 Front
48 inches
none none
52 inches 1 Rear
• Any rear weight must be removed when a
Tru–Track
® Sulky is installed.
• When a Tru–Track ® Sulky is installed front weights
are needed. Contact an Authorized Service Dealer
for the correct quantity of weights and placement.
WARNING
The front end of the machine can rapidly rise up
when the mower is removed. This could cause
serious injury to you or bystanders.
Support the rear of the machine when removing
the mower from the carrier frame.
Figure 22
Installing the front weight.
1. Bolt 3. Weight
2. Washer 4. Nut
Figure 23
Installing the rear weight.
1. Nut 3. Washer
2. Weight 4. Bolt
22