Toro 23823/A, Руководство пользователя программного обеспечения

Страница: 8 / 16

8. Release the rocker switch to proceed to the next
step in the sequence (
Figure 35 ).
g231720
Figure 35
9. Make the pipe connection; refer to Adding Drill
Pipes in the
Operator’s Manual .
10. Hold the lower button on the joystick ( Figure
36 ) to release the pipe ( Figure 37 ) and release
the button.
g210527
Figure 36
g232385
Figure 37
11. Hold the lower section of the rocker switch
(
Figure 39 ) until the loader arms rotate back and
the cam assembly returns to the home position
(row 4) (
Figure 40 ).
g231721
Figure 38
g210462
Figure 39
g232386
Figure 40
12. Release the rocker switch to start the push-pipe
process again. The cam assembly goes to
the row picked in step
2 of Pulling Pipe in
SmartTouch Mode (page 2) .
8