Toro 22618, Руководство оператора

Страница: 7 / 32

Product Overview
g393406
Figure 3
1. End plate 6. Rail locking pin
2. Spitting wedge 7. Hydraulic filter
3. Jack stand 8. Hydraulic reservoir
4. Hitch receiver 9. Control lever
5. Safety chains
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Engine Controls
g019744
Figure 4
1. Recoil-start handle 5. Fuel cap
2. Fuel valve 6. Oil dipstick
3. Choke lever 7. Oil-drain plug
4. Throttle lever
8. O
N
/O
FF
switch
Fuel Valve
The fuel valve ( Figure 4 ) is located underneath the
choke lever. Move the lever for the fuel valve to the
O
N
position before attempting to start the engine.
When you have finished using the machine, shut off
the engine and move the fuel-valve lever to the O
FF
position.
Choke Lever
Use the choke lever ( Figure 4 ) to start a cold engine.
Before pulling the recoil-start handle, move the choke
lever to the C
LOSED
position. Once the engine is
running, move the choke lever to the O
PEN
position.
Do not use the choke if the engine is already warmed
up or if the air temperature is high.
Throttle Lever
The throttle lever ( Figure 4 ) controls the speed (rpm)
of the engine. It is located next to the choke lever.
Engine O
N
/O
FF
Switch
The O
N
/O
FF
switch is located on the front of the
engine.
7