Toro 22618, Руководство оператора

Страница: 18 / 32

Maintenance
Determine the left and right sides of the machine from the normal operating position.
Maintenance Safety
•
Before repairing the machine do the following:
– Park the machine on level ground and adjust
the jack stand to ensure that the machine is
level.
– Fully retract the splitting wedge.
– Shut off the engine.
– Disconnect the spark-plug wire.
•
Clean grass and debris from the muffler and
engine to help prevent fires.
•
Clean up oil or fuel spills.
•
Do not allow untrained personnel to service the
machine.
•
Use jack stands to support the machine and/or
components when required.
•
Carefully release pressure from components with
stored energy.
•
Remove the spark-plug wire before making any
repairs.
•
Keep your hands and feet away from moving
parts. If possible, do not make adjustments with
the engine running.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Never interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous, and
such use could void the product warranty.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first hour
• Check the wheel lug nuts.
After the first 10 hours
• Check the wheel lug nuts.
After the first 20 hours
• Change the engine oil.
Before each use or daily
• Inspect the air-cleaner elements.
• Check the engine-oil level.
• Check the tire pressure.
• Check the hydraulic-fluid level.
Every 50 hours
• Clean the air-cleaner elements. Clean them more frequently in dusty operating
conditions.
Every 100 hours
• Change the engine oil (more often in extremely dusty or sandy conditions).
• Check the spark plug.
• Clean the fuel-sediment cup.
• Replace the hydraulic filter.
• Replace the hydraulic fluid.
Every 300 hours
• Replace the paper air-cleaner element. Replace it more frequently in dusty
operating conditions.
• Replace the spark plug.
Every 500 hours
• Grease the wheel bearings.
Yearly
• Check the wheel lug nuts.
Yearly or before storage
• Change the engine oil.
• Clean the fuel-sediment cup.
Note:
Refer to your engine owner’s manual for additional maintenance procedures.
18