Toro 22618, Руководство оператора

Страница: 27 / 32

g206553
Figure 33
1. Upper notch 2. Breather cap
5. Remove the breather cap ( Figure 33 ).
6. Wipe the dipstick off and thread the breather
cap into the reservoir.
7. Remove the dipstick and verify that the fluid is at
the upper notch (
Figure 33 ). Install the breather
cap.
8. If the fluid level is low, remove the filler plug and
slowly add hydraulic fluid into the reservoir to
raise the level to the upper notch on the dipstick
(
Figure 34 ).
g207827
Figure 34
1. Filler plug
9. Install the filler plug.
Replacing the Hydraulic
Filter
Service Interval: Every 100 hours
1. Park the machine on level ground, adjust the
jack stand to ensure that the machine is level,
fully retract the splitting wedge, and shut off the
engine.
2. Place a drain pan under the filter and replace
the filter (
Figure 35 ).
g206495
Figure 35
3. Clean up any spilled fluid.
27