Toro 137-1019, Руководство по установке

Страница: 5 / 24

6. Add sealant to the installation location of the
wiper mount assembly (Box A of
Figure 12 ).
7. Install the foam seal onto the wiper mount frame
(Box B of
Figure 12 ).
g253030
Figure 12
1. Hex head bolts (5/16-18 x
3/4 inch) 4. Bolt (1/4-20 x 1/2 inch)
2. Nut (5/16 inch) 5. Nut (1/4 inch)
3. Carriage bolt (5/16-18 x
3/4 inch)
8. Install the wiper mount assembly onto the cab
frame (Box C of
Figure 12 ).
9. Secure the wiper mount assembly using 3 hex
head bolts (5/16-18 x 3/4 inch), 2 carriage bolts
(5/16-18 x 3/4 inch), 2 nuts (5/16 inch), 2 bolts
(1/4-20 x 1/2 inch), and 2 nuts (1/4 inch) as
shown in Boxes D and E in
Figure 12 .
4
Routing the Wiper Motor
Wire Harness
No Parts Required
Procedure
Route the previously removed (step 5 of 2 Removing
and Preparing the Cab (page 1) ) as shown in Figure
13 and Figure 14 .
g253026
Figure 13
g253011
Figure 14
5