Toro 137-1019, Руководство по установке

Страница: 2 / 24

2
Removing and Preparing
the Cab
No Parts Required
Procedure
1. Hold the cab frame using the lifting points and
remove the hardware securing the cab to the
machine.
g026247
Figure 2
1. Lifting points
2. Lift the cab off of the machine.
3. Locate the left and right frame panels.
g253023
Figure 3
1. 3/4 inch 2. 3/4 inch
4. Cut a 3/4 inch notch on each side of the panel
as shown in
Figure 3 ).
5. Remove the roof of the cab and remove the
parts of the wiper assembly (
Figure 4 ).
Note:
Save these parts to be installed again
later.
g253075
Figure 4
6. Add sealant to the seams of the cab ( Figure 5 ).
g253027
Figure 5
7. Add sealant to the seams of the wiper mount
(
Figure 6 and Figure 7 ).
2