Toro 136-0372, Руководство по установке

Страница: 32 / 64

Figure 65
1. Return hose—2.5 x 71 cm (1 x 27-7/8 inches)
3. Assemble the 90° barbed fitting of the return hose into
the rear port of the inboard T-fitting (
Figure 64 ).
4. Secure the 90° fitting to the T-fitting with the retainer
(large) that you removed in step
1 of Disconnecting the
Return, Sprayer-Supply, and Bypass Hoses (page 14) .
Installing the Agitation Supply Hose
1. Assemble the quick-connect fitting (straight barbed) of
the agitation supply hose—2.5 x 72 cm (1 x 28-1/4
inches) onto the quick coupling of the agitation control
valve with the retainer that is supplied with the hose
(
Figure 66 ).
Figure 66
1. Retainer 4. Quick-connect fitting
(agitation throttle valve)
2. Quick-connect fitting
(agitation control valve) 5. Agitation supply hose—2.5
x 72 cm (1 x 28-1/4 inches)
3. Quick-connect fitting
(straight barbed)
2. Route the hose to the agitation throttle valve ( Figure
67 ).
32