Toro 130-6020, Инструкция по установке

Страница: 3 / 4

3
Installing the Plates and
Bumpers
Parts needed for this procedure:
4 Bolt (#10 x 1-1/4 inch)
4 Bolt (#10 x 2 inch)
8 Washer
4 Bumper
8 Plate
4 Locknut
Procedure
1. Remove the existing bumpers from the left side of the
machine (
Figure 3 ).
Figure 3
1. Bumper
2. Install the plates and kit bumpers onto the machine as
shown in
Figure 4 .
Figure 4
1. Locknut 4. Washer
2. Plate 5. Bolt (#10 x 2 inch)
3. Kit bumper 6. Bolt (#10 x 1-1/4 inch)
3. Repeat the procedure for the right side of the machine.
3