Toro 13-32H Wheel Horse, Руководство оператора

Страница: 18 / 36

18
6. Raise the grass collector and remove the hairpin,
2 washers, and clevis pin that secure the discharge tube
to the rear plate (Fig 13).
m-6339
2
3
4
1
5
Figure 13
1. Rear plate
2. Discharge tube
3. Clevis pin
4. Hair pin
5. Washers
7. Remove the nut and outer washer that secure the
discharge chute to the discharge tube (Fig. 14).
m-6340a
3
1
2
Figure 14
1. Discharge tube
2. Nut and outer washer
3. Discharge chute
8. Move the height-of-cut lever to the lowest position.
9. Remove the bolt, washer, and nut that secure the 2 strap
ends together (Fig. 15).
m-6338a
2
3
1
4
Figure 15
1. Straps
2. Nut
3. Bolt
10. Move the straps away from the the discharge chute.
Note: Do not remove the straps from the mower
housing. If a strap comes off the housing, insert it as
shown in Figure 16.
m-6362/m-6363
1
2
Figure 16
1. Inserting the strap into the
slot 2. The strap is inserted into
the slot
11. Remove the discharge chute from the mower housing.
Note: Attach the nut and outer washer that you
removed to the discharge chute to prevent losing them.
12. Install the Recycler cover onto the mower.
13. Join the 2 strap ends around the Recycler cover as
shown (Fig. 15).
14. Align the holes in the strap ends and fasten them
together snugly with the bolt, washer, and nut you
previously removed.
15. Raise the grass collector and install the clevis pin,
2 washers, and hairpin to secure the discharge tube to
the rear plate (Fig 13).