Toro 13-32H Wheel Horse, Руководство оператора

Страница: 13 / 36

13
Disengaging the Blade
1. Depress the brake pedal to stop the machine.
2. Shift the blade control (PTO) to Disengage (Fig. 4).
Setting the Height of Cut
Use the height-of-cut lever to raise and lower the mower to
the desired cutting height. You can set the cutting height to
1 of 4 positions from approximately 3.8 to 9 cm.
1. Disengage the blade control (PTO).
2. Pull on the height-of-cut lever, move it to the desired
position, and release it slowly into the notch (Fig. 5).
m-5952
1
3.8 cm
5.5 cm
7.5 cm
9 cm
Figure 5
1. Height-of-cut lever
Starting the Engine
1. Sit down on the seat.
2. Set the parking brake; refer to Setting the Parking Brake
on page 12.
Note: The engine will not start unless you engage the
parking brake.
3. Shift the blade control (PTO) lever to Disengage
(Fig. 6).
1
2
3
Figure 6
1. Disengage
2. Engage
3. Blade control (PTO)
4. Shift the throttle lever to Choke (Fig. 7).
1
2
3
Figure 7
1. Choke
2. Fast
3. Slow
Note: An engine that has been running and is warm may
not require step 4.