2
1
Figure 5
1. Deflector
7.
Mount chute assembly to discharge opening with a
pivot rod, (2) flat washers and cotter pins. Position
components as shown in figure 6.
1
Figure 6
1. Pivot rod
8.
Hook spring onto eye bolt and spring mount bracket
(Fig. 3 & 4).
9.
Measure, mark and cut off handle tube to required
length for specific blower application.
Amount to cut off handle tube:
SandPro – 20 to 24 inches
Groundsmaster 200 Blower – 10 to 12 inches
Groundsmaster 300 Blower – 10 to 12 inches
GroundsPro 2000 Blower – None
Cut to length
1
Figure 7
1. Handle
10.
Slide handle tube into handle support and loosely
secure with (2) U–bolts, washers and nut (Fig. 8).
1
2
Figure 8
1. Handle tube
2. Handle support
11.
Mount handle assembly to blower mounting tabs with
a washer and cotter pin (Fig. 9).
1
2
Figure 9
1. Handle assembly
2. Linkage rod
12.
Mount linkage rod to handle assembly with a washer
and cotter pin (Fig. 9).
13.
Mount linkage rod to deflector assembly with a washer
and cotter pin (Fig. 10).
1
Figure 10
1. Linkage rod
