Product Overview
1
2
3
4
5
6
8
7
G024508
Figure 12
1.
Cable
5.
Stop-chain assembly
2.
Boom
6.
Drawbar
3.
Lift chains
7.
Drawbar bracket
4.
Frame bracket
8.
Rake
Operation
Installing and Removing the
Weights
The flex tooth rake requires 4 weights, which are included
with the machine. Always ensure that your machine has the
appropriate number of weights.
Refer to the following table for how many weights are
required on the front of the machine:
Attachment
Number of weights required
Flex tooth rake
4
Flex tooth rake with finish brush
6
Nail drag
6
Nail drag with finish drag mat
8
1.
Remove the 2 bolts and 2 nuts securing the existing
weights on the front of the machine (Figure 13).
Note:
If the machine is equipped with the light kit,
remove the nut and the bolt securing the front light to
the machine. Retain all of the parts; refer to the
Light
Kit Installation Instructions
.
G023729
Figure 13
2.
Add or remove weights as necessary.
3.
Secure the weights with the 2 bolts and the 2 nuts.
Note:
If the machine is equipped with the light kit,
install the front light by inserting the bolt through the
8
