Toro 08712, Руководство оператора

Страница: 19 / 24

8. Tighten both lift lever guide plate mounting
screws to secure the adjustment (
Figure 25 ).
9. Remove the hour meter from the old control
panel and install it in the new control panel.
10. Install the new control panel and plug the wire
into the hour meter.
11. Secure the control panel in place with the
fasteners previously removed (
Figure 26 ).
g003676
Figure 26
1. Knob 2. Control panel
12. Install the knob onto the lift lever ( Figure 26 ).
13. Grease the front lift frame; refer to Greasing the
Lift Frame (page 20) .
14. Check the hydraulic-fluid level and replenish the
fluid as required.
12
Reading/Storing the
Documentation
Parts needed for this procedure:
1 Operator’s Manual
Procedure
1. Read the documentation.
2. Store the documentation in a safe place.
19