Toro 07385 Workman HDX-D, Руководство оператора

Страница: 41 / 60

Figure 44
1. Engine oil-drain plug
3. When the oil stops, install the drain plug.
4. Remove the oil filter ( Figure 45 ).
Figure 45
1. Engine-oil filter
5. Apply a light coat of clean oil to the new filter seal
before screwing it on.
6. Screw the filter on until the gasket contacts the
mounting plate, then tighten the filter 1/2 to 2/3 of
a turn.
Note:
Do not overtighten.
7. Add oil to the crankcase; refer to Checking the
Engine-oil Level (page 19) .
Fuel System
Maintenance
Checking the Fuel Lines and
Connections
Service Interval: Every 400 hours/Yearly (whichever comes
first)
Every 1,000 hours/Every 2 years (whichever comes
first)
Inspect the fuel lines and connections for deterioration,
damage, or loose connections.
Servicing the Fuel Filter/Water
Separator
Draining the Fuel Filter/Water Separator
Service Interval: Before each use or daily—Drain water
or other contaminants from the water
separator.
1. Place a clean container under the fuel filter ( Figure 46 ).
2. Loosen the drain plug on the bottom of the filter
canister.
Figure 46
1. Water separator filter canister
3. Tighten the drain plug on the bottom of the filter
canister.
41