2.
Install the 4 washers over the 4 hinge pins at the cab
frame for the machine (Figure 2).
3.
Install the door onto the hinge pins mounted on the
cab frame (Figure 2).
Figure 2
1.
Door
3.
Washer
2.
Hinge pins
4.
Door-hinge mount
4.
Install the fitting at the rod end of the door strut onto
the ball stud at the cab frame (Figure 3).
Figure 3
1.
Ball stud (cab frame)
3.
Fitting (strut cylinder)
2.
Fitting (strut rod)
4.
Ball stud (door frame)
Note:
The door-fitting strut has a quick-release end.
Flip the lever vertically for installation. Once installed,
close the lever to capture the ball stud (Figure 4).
Figure 4
1.
Lever
5.
Install the fitting at the cylinder end of the strut onto
the ball stud at the door frame (Figure 3).
2
