IMPORTANT !
Before continuing to STEP 17, check the position of the rear bow with Figure 14B and adjust
accordingly.
Step 17:
Install Top / Rear Curtain
A.
Cut a 40” piece of adhesive hook Velcro
®
(DO NOT remove protective backing strip)
Press the
hooked strip onto the loop (soft pile) Velcro
®
located at the bottom edge of the Rear Curtain section of the
panel. (window)
B.
Starting from the front, attach the front edge Velcro
®
to the two strips previously installed on the
windshield frame in steps 14A.
C.
Drape the Top & Rear Curtain over the top frame members and down the back (between the ROPS
bar if installed) of the installed frame.
DO NOT fasten any other Velcro
®
strips at this time.
D.
Fasten the Velcro
®
strips of the Top panel to the strips installed on the top frame in step 15, see figure
15.
E.
Fasten the Velcro
®
strips of the Top panel (rear window section) to the strips installed on the Rear
Posts in Step 14 and Step 16.
F.
Carefully remove the protective strip (avoid separating the strips) from the adhesive hook Velcro
®
that
was installed on the lower edge of the Rear Curtain (step 17A)
G.
Gently pull down on the curtain and press the adhesive hook Velcro
®
evenly to the back of the seat
base.
Step 18; See Figure 18A &18B:
Install Front Panel Vinyl (20) & the assembled
Doors.
A.
Attach the Velcro
®
strips at the top together.
Attach the sides to the Velcro
®
strips on the
forward side of the Front Posts.
B.
Reinstall Doors and secure the Rear flap of
the Door to the Rear Curtain Velcro
®
. Secure the
flaps on the rear corners of the top to the Door
Velcro
®
at the arrow.
Figure 18B
Figure 18A
20
14
