Toro 07142, Руководство оператора, Страница: 13 / 16

4. Route the wire harness behind the cab and
under the seat, and secure the clip on the wire
harness to the side panel (
Figure 19 ).
g035260
Figure 19
1. Wire harness
5. Install the black ground wire to the ground wire
on the Power Converter Kit wire harness (
Figure
20 ).
Note:
The black terminal ring is not used.
6. Install the red power wire to the power wire on
the Power Converter Kit wire harness (
Figure
20 ).
g278776
Figure 20
1. Cab wire harness 3. Black ground wire with
spade terminal
2. Black ground wire with
terminal ring (not used) 4. Red power wire with spade
terminal
7. Connect the remaining wire to the fused wire on
the new fuse block (
Figure 17 ).
8. Lower the bed and connect the battery; refer to
the
Operator’s Manual .
9. Install the previously removed seat base.
13