Toro 07142, Руководство оператора, Страница: 12 / 16

7
Routing the Wire Harness
Parts needed for this procedure:
1 Fuse block
2
Hex-washer head screw (#10 x 3/4 inch)—for 2019
and after
electric machines only
2
Serrated nut (#10)—for 2019 and after electric
machines only
2
Self-tapping screw—for 2019 and after gasoline
machines only
1
Fuse (15 A)
For Electric Machines
Important:
The Power Converter Kit is required
to use the cab on a Workman GTX Electric utility
vehicle. Contact your authorized Toro distributor
for more information.
1. Install the new fuse block as follows:
•
For 2018 and before machines , snap the
new fuse block onto the existing fuse block
on the machine (
Figure 17 ).
g035257
Figure 17
1. To ground 3. To the optional washer
pump kit
2. To the fused wire 4. New fuse block
•
For 2019 and after machines , secure the
new fuse block using the 2 hex-washer head
screws (#10 x 3/4 inch) and 2 serrated nuts
(#10) as shown in
Figure 18 .
g290937
Figure 18
1. New fuse block 3. Serrated nut (#10)
2. Hex-washer head screw
(#10 x 3/4 inch) 4. Female connector
2. For 2019 and after machines , connect the
female connector on the harness to the new
fuse block (
Figure 18 ).
3. Connect the large connector on the new fuse
block to the optional power cable on the existing
fuse block (
Figure 17 ).
12