Toro 04723, Руководство оператора

Страница: 4 / 12

1
Installing the Spiker Units
No Parts Required
Procedure
1. Position the spiker unit under the traction-unit
suspension arm.
2. With the latches on the suspension-arm bar
opened (
Figure 3 ), push the suspension arm
down so that it fits over the bar across the top of
the spiker unit (
Figure 4 ).
g018311
Figure 3
1. Latch—closed 3. Latch—opened
2. Suspension-arm bar
g018312
Figure 4
1. Suspension-arm bar 2. Spiker-unit bar
3. Close the latches to lock the spiker unit in place
(
Figure 3 )
Note:
When the latches are properly locked,
you can hear and feel a click.
4. Insert the motor into the left side of the spiker
unit (as viewed from the operator’s position),
and pull the motor retaining bar on the spiker
unit toward the motor until you hear a click from
both sides of the motor (
Figure 5 ).
g014690
Figure 5
1. Motor 3. Cavity
2. Spline shaft 4. Motor-retaining bar
4