Toro 04495, Руководство оператора, Страница: 1 / 8

Form No. 3390-887 Rev B
Tri-Roller
Greensmaster ® 3000 Series
Model No. 04495—Serial No. 315000001 and Up
Operator's Manual
This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Setup
Mounting the Pull Arm
Bumpers (Greensmaster 3050,
3100, 3150, and 3200)
1. Using the dimensions shown in Figure 1 , drill 2
holes with a diameter of 5.6 mm (0.221 inch) on the
underside of each pull frame cross tube.
1
2
3
4
G028061
Figure 1
1. 49.3 cm (19.4 inches) 3. 1.9 cm (3/4 inches)
2. 9.0 cm (3.5 inches) 4. Pull frame cross tube
2. Mount the 2 recessed bumpers to the underside of each
pull frame cross tube with 2 washer-head self-tapping
screws (
Figure 2 ).
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3390-887* B