Toro 03673 Reelmaster 5410-G, Руководство оператора

Страница: 28 / 48

Important:
Running the engine with the bypass
valve open causes the transmission to overheat.
Locating the Jacking Points
Note:
Use jack stands to support the machine when required.
•
Front—rectangular pad, under the axle tube, inside each
front tire (
Figure 33 )
Figure 33
1. Front jacking point
•
Rear—rectangular axle tube on the rear axle
Locating the Tie Downs
•
Front—the hole in the rectangular pad, under the axle
tube, inside each front tire (
Figure 34 ).
Figure 34
1. Front tie down
•
Rear—each side of the machine on the rear frame ( Figure
35 ).
Figure 35
1. Rear tie down
Understanding the Diagnostic
Light
The machine is equipped with a diagnostic light which
indicates if the machine detects a malfunction. The diagnostic
light is located on the InfoCenter, above the display screen
(
Figure 36 ). When the machine is functioning properly
and the key switch is moved to the On/Run position, the
diagnostic light turns on briefly to indicate that the light
is working properly. When a machine advisory message is
displayed, the light illuminates when the message is present.
28